|
1. Loading Device The drilling course and work range have been broadened extensively by the linkage mechanism of five elements. |
|
2. Large Size Air Cooling Oil Cooler Steady drilling operations have been made possible even in intensely hot zones by the adoption of the mass oil air cooler. Moreover, the oil temperature sensor is automatically controlled and prevents over cooling in low temperature. |
|
3. Pato Light Pato light is interlocked with the alarm system and the operator is worned about any rise in oil temperature. Dropping of oil level, and return filter with light and alarms. |
|
4. Water-cooled Engine with Turbocharger The new clean engine comply with the emission regulartions EU stage II Japan stage II. The adoption of a turbocharger ensures goodcombustion and economical efficiency. |
|
5. Control panel The movement of the control panel is hydraulic. Lver operation has a vertical range of 50cm and a 180deg. has become possible and drilling operation can be carried out from the driver's seat of the crawler. |
|
6. Automatic Rod Breaker With the adoption of an automatic rod breaker, which performance screw return the rod automatically with a simple operation. The seperation work of a screw can be carried out more safety and quickly. Moreover, a modification in rod size can be handled with a convenient one-step exchange of the long long piece. |
|
7. Automatic idling Changeover Switch If there is no load during a fixed time, idling is automatic offering economical efficiency. If load is applied, the number of rotation will be raised automatically.) |
|
8. Drill Head The KD-800 type drill head was developed uniquely by SungHan. It is a highly efficient machine, equipped with the newest systems such as a back hammer and has a rotation torque output of 8000 N-m |
|
9. Drilling Data Measuring System(option) Optionally, various type of measuringand recording system are available to be mounted on a machine on demand. |